TV CHANGHONG SERVICE MODE

Salah satu kode menu servis untuk TV changhong adalah sebagai berikut:
kecilkan volume tv ke minmum atau nol.Tekan tombol MUTE pada remote dan tahan, tekan MENU pada tv. akan timbul logo setting ( S ) .

Biasakan sebelum merubah settingan parameter,catat dahulu semua data-data aslinya sebelum anda rubah,untuk mencegah kesalahan pengaturan parameter.

Jika TV terkunci pada kondisi CHILD LOCK, tekan menu sampai masuk ke posisi SYSTEM,lalu tekan tombol help atau ( ? ) sampai masuk ke posisi PARENTAL GUIDE.masukan kode : 6688 melalui remote,rubah atau matikan setelan PARENTAL GUIDE ke posisi OFF.

CHANGHONG TV SERVICE MODE CODE

For service mode set volume to minimum .Then press " MUTE " key ( on remote ) and holding it press " MENU " key ( on tv set ) . Red " S " must appear on the screen.
forgot the password for the Parental Control ? You can press the MENU button on the Remote repeatedly until the TV displays the SYSTEM index, to adjust it , press the ?/? button to select the sub-menu. then press the ?/? button to highlight the PARENTAL GUIDE (provide it has been preset) and use the Channel Number buttons to enter the initial pass code 6688. PARENTAL GUIDE ON switches to the PARENTAL GUIDE OFF mode.

Regards,
zic

ADJUSTING SONY'S TV

PENGATURAN SETTING PADA TV SONY
SONY TELEVISIONS

Read the _ SERVICE MODE WARNING _ before proceeding.

Service switch - small, round opening in the rear cabinet near the Video inputs or the antenna jack (typically early-90's), push and hold while turning the power on - or if there is no service switch on the rear of the TV use the remote control and press within one second of each other:

[PWR OFF] - [DISP], [5], [VOL+], [PWR ON]
-or-

[PWR OFF] - [DISP], [5], [PWR ON]
-or-

[PWR OFF] - [DISP], [5], [VOL+], [PICTURE], [PWR ON]

The TV will turn on in service mode.

You may need to set the television into 'tuner' mode (instead of Video-1, etc.) before performing the service mode button sequence.

NAVIGATE IN SERVICE MODE
[1] = Moves to Previous Menu Item
[4] = Moves to Next Menu Item
[3] = Adjusts Value Up
[6] = Adjusts Value Down
[MTS] = Toggles Stereo/Mono Audio

SAVE NEW SETTING
[MUTE] followed by [ENTER] to store NEW setting to NVRAM

RESTORE USER SETTINGS
[8],[ENTER] = Restores All *USER* setting to Factory Defaults

RESET VALUES
[0],[ENTER] = Read Default Value from Stored Settings (Reset)

LEAVE SERVICE MODE
[PWR OFF] = Leave Service Mode any settings not written will be in effect until TV is unplugged or a Reset is performed.

RETURN TO DEFAULT SETTINGS:
* BEFORE storing NEW settings - unplug TV from wall, wait a few seconds, then plug back in, turn TV set on - All settings not written will have been lost.

* AFTER storing NEW settings - restore original value from list you made of original values before adjustments and store in NVRAM.

If you're attempting to adjust color or geometry errors, you'll need the Video Essentials DVD, Laser Disc or some other source of test material.

I also maintain a SONY XBR Service Mode list on my HomePage.

For additional information on how to preform the 16x9 squeeze (to view anamorphic DVDs at their full resolution) see the "16x9 (Anamorphic) Vertical Squeeze" or the "Sony Wega 16x9 (Anamorphic) Vertical Squeeze" FAQs that I maintain on my web site.

A complete although somewhat outdated list of Sony XBR Service Mode items can be found at http://www.repairfaq.org/~filipg/. This information appears to be for the ~1990 version of the XBR^2 series.

Note: Provisions for convergence adjustments are not enabled on 27" or smaller Sony direct view television sets.
5.1a SUGGESTED SONY SETTINGS
SONY "XBR" SERIES

TRINITONE: NTSC STD - controls color temperature - basically how greys will appear on the monitor. The "High" and "Medium" settings make everything look too blue.

NR: OFF - filters out high-frequency noise, at a slight loss of detail. Turn it OFF and the picture quality improves. It also tends to degrade fine picture detail.

DYNAMIC PICTURE: OFF - when turned ON it whitens light areas and darkens shadow areas of the picture, creating a high contrast although less accurate picture. Leave it OFF.

COLOR CORRECTION: OFF - when turned ON it tries to correct fleshtones but has a tendency to mix up certain colors and make them look like a prosthetic beige.

PROGRAM PALETTE: MOVIE: ON - only the movie mode allows the television set to run with flat and wide video bandwidth. It also shuts OFF scanning velocity modulation (SVM), when VMLV is run down to zero it will shut OFF SVM for the other modes. Each mode (Movie, Sports, etc.) has a separate adjustment memory.

Artikel selengkapnya ; klik DISINI

regard,s
SolderKnight

TV MENU SERVIS KODE

MENU SERVICE CODE adalah kode untuk masuk kedalam kondisi "SERVICE MODE".dalam istilah reparasi pesawat televisi..
ada beberapa cara,diantaranya dengan menggunakan kode-kode angka atau hurup atau juga kombinasi dari keduanya..cara lain adalah dengan menggunakan trik hardware dengan cara men-short/jumper sesaat pada titik / atau switch yg di sediakan ( sharp,panasonic,thomson,phillips dll).
disini saya akan memberikan beberapa cara/kode untuk membuka menu servis dari beberapa merek televisi yg umum beredar diindonesia..tentunya pesawat tv keluaran mulai tahun 2000/01 hingga sekarang,karena umumnya pabrikan hanya memodifikasi fiturnya saja.


TOSHIBA : TEKAN MUTE DI REMOTE SEKALI,KEMUDIAN TEKAN LAGI DAN TAHAN MUTE + MENU DI TV .ULANGI UNTUK PROSES BERIKUTNYA
TEKAN MENU DIREMOTE-TEKAN ANGKA 4,7,2,5
TEKAN VOL(-) DI TV -TEKAN DAN TAHAN ANGKA 9


SANYO : MENU DI REMOTE + VOLUME UP TV

LG FLATRON: TEKAN OK DIREMOTE + OK DI TV atau MENU REMOTE + MENU DI TV


TCL : TEKAN DISPLAY (OSD) DIREMOTE + VOLUME DOWN DI TV ,tahan 3 detik

PHILLIPS : POSISI TV STNDBY,TEKAN 0,6,2,5,9,MENU

POLYTRON : POSISI TV STNDBY, TEKAN DAN TAHAN MENU DI REMOTE HINGGA TV MENYALA MASUKAN KODE ANGKA 1013.

PANASONIC : SHORT (KONEK SESAAT) PIN 'FA-1' KE 'FA-2' ATAU TP-8 KE GROUND
PANASONIC TX SERIES :TEKAN VOL(-) DI TV + OSD


SHARP : SHORT KAKI (PIN)6 DAN PIN 7 SESAAT PADA IC MCU (TDA 98XXX).UNTUK KELUAR SHORTKAN KEMBALI

SHARP EXPRESSION : HUBUNGKAN ATAU JEPIT DUA KAWAT /JUMPER J800 ( ADA DISEBELAH TUNER ) YG PCB- TELAH DISEDIAKAN LUBANG DAN DUA JUMPER SEJAJAR.

CRYSTAL : POSISI TV STNDBY,TEKAN VOLUME UP + VOLIME DOWN PADA TV BERSAMAAN DAN TAHAN HINGA TV ON

.
AKARI: TEKAN SLEEP DI REMOTE + MENU TV


SAMSUNG : POSISI STANDBY TEKAN DI REMOTE : MENU - PSTD - MUTE - POWER ON
SAMSUNG PLANO :POSISI STANDBY, TEKAN DI REMOTE : DISPLAY-MENU-MUTE-POWER ON
SAMSUNG PLANO DIGITAL HD100: STANDBY-DISPLAY-MENU-MUTE-POWER
ATAU : STANDBY-MUTE-1-8-2-POWER ON


.
AKIRA,FUJITEC,BOOMBA:
DAN BEBERAPA MEREK CHINA YANG LAINNYA YG MENGGUNAKAN IC PROGRAM TYPE LC8632XX SERIES : TEKAN MENU DI REMOTE DUAKALI - RECALL (Q.VIEW) - MUTE.

TV CHINA LAINNYA ( KCL,MITOCHIBA,BAZZOMBA) TEKAN VOLUME DI TV HINGGA NOL.TEKAN RECCAL DI REMOTE SEKALI, TEKAN DAN TAHAN VOLUME ( - ) DI TV BERSAMAAN DENGAN TEKAN KEMBALI RECALL DI REMOTE..ulang proses tersebut untuk masuk ke sub menu selanjutnya sampai ke posisi keluar menu servis.


AIWA : TOMBOL MENU SERVISNYA ADA DI DALAM REMOTE DI ATAS TOMBOL VOLUME (+),BONGKAR DAHULU.



JVC : TEKAN DAN TAHAN BERSAMAAN OSD+MUTE
ATAU TEKAN DAN TAHAN OSD+PICTURE

HITACHI: TEKAN DAN TAHAN TOMBOL AVDI TV, HIDUPKAN POWER SWITCH TV

SONY : STANDBY- OSD - 5 - VOL(-) - POWER ON

RCA/THOMSON : TEKAN DAN TAHAN TOMBOL VT DI TV + POWER SWITCH ON TV



Beberapa merek TV CHINA juga ada yang tombol menu servisnya di dalam remote orsinilnya
.

Barangkali ada masukan yg lain dari teman-teman ?

thank's
zic